Smart questions
Smart answers
Smart people
Join Tek-Tips Forums
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Member Login




Remember Me
Forgot Password?
Join Us!

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips now!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

Join Tek-Tips
*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.
Jobs from Indeed

Link To This Forum!

Partner Button
Add Stickiness To Your Site By Linking To This Professionally Managed Technical Forum.
Just copy and paste the
code below into your site.

alan24 (Programmer) (OP)
15 Dec 09 2:44
Morning
I recently upgraded from CM3 to CM5 this included several LSP's. I am now installing several G430's on the same network, I have made sure everything is on the correct version of software/firmware and all seems well. Except, when the link to the main server goes down, the phones (1608's) first look to the main server and then to the G430, but do not log on. I have enabled SLS and when you log onto the gateway the first thing it tells you is that SLS is enabled. I did the install pretty much by the book and everything I check says it should be working, when the phones are logged onto to the main server I can ping them from the G430.
There are currently no lines attached to the gateway, that is happening later today.
Many thanks
Alan
alan24 (Programmer) (OP)
15 Dec 09 5:41
I am currently configuring SLS through CLI, does the G430 not get any information from the main server?
Do you have put all the information in for every station, module, bri, co trunk, trunk grp and dial pattern in for it to work?
Thanks
Alan
EPalle (MIS)
15 Dec 09 6:39
Do not forget ip-codec en fac (to dial out).
Don't think this is mentioned in the manual.
Nick44 (TechnicalUser)
15 Dec 09 7:35
For SLS you have to manually enter each survivable extensions details as well as the trunks.
 

Speak softly and carry a big switch

alan24 (Programmer) (OP)
15 Dec 09 7:43
Thank you
Nick44 (TechnicalUser)
15 Dec 09 7:44
I have a PDF with all the steps if you want it.

Speak softly and carry a big switch

alan24 (Programmer) (OP)
15 Dec 09 10:36
That would be great, thanks Nick
Is it still frowned upon to post email address, just in case
alandotdixonatngcnetworkdotcodotuk
Cheers fella

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Back To Forum

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close