INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Jobs

Scalar 24 could not be seen by EMC Networker

Scalar 24 could not be seen by EMC Networker

(OP)
I have quantum ADIC Scalar 24.

From two days ago, I have had problem with backup on networker. I suspect my autocharger-jukebox. The reason for that is when I run the following command I have output:

C:\Documents and Settings\Administrator>inquire -l

-l flag found: searching all LUNs, which may take over 10 minutes per adapter
        for some fibre channel adapters.  Please be patient.

scsidev@0.0.0:DGC     RAID 5          0326|Disk, \\.\PHYSICALDRIVE0
                                           S/N: CK200071900247
                                           WWNN=6006016049AD1C003A826E441E35DC11

                                           PORT=00000001
scsidev@0.1.0:DGC     RAID 5          0326|Disk
scsidev@0.2.0:DGC     RAID 5          0326|Disk
scsidev@0.3.0:DGC     RAID 5          0326|Disk
scsidev@0.4.0:IBM     ULTRIUM-TD3     64D0|Tape, \\.\Tape0
                                           S/N: 1210266394
                                           ATNN=IBM     ULTRIUM-TD3     12102663
94
                                           WWNN=500308C175E80426
                                           WWPN=500308C175E80427
                                           PORT=00000001
scsidev@4.0.0:DGC     RAID 5          0326|Disk
scsidev@4.1.0:DGC     RAID 5          0326|Disk
scsidev@4.2.0:DGC     RAID 5          0326|Disk
scsidev@4.3.0:DGC     RAID 5          0326|Disk

In fact the NMC ( EMC networker) could not see autochanger.

Ok, I have tested by using LCD and its keys the following:

Status - Fibre Status: Drive 1 No Light
        speed N/A
        Topol N/A

        Drive 2 Connected
        speed 4GB/sec
        topol L Port

Is that problem? Can I test further to see what the problem is if I swap two Fibre cables on the rear of the jukebox?

RE: Scalar 24 could not be seen by EMC Networker

(OP)
Just to add: I have tried to reboot the autochanger by cliking on and off. It is very interesting that it comes with configuration wizards, which I cancelled.

Maybe that tells  something has been changed and needs reconfiguration?


I have checked the Status - Errors: I have the following error log over there: SAC 80 7046 (Picker Failed; Clear Picker Status) and SAC E& 7043. I have inspected the tapes and everything seems to be OK. In fact, I could not see whether these messages are in fact from long time ago.
Is there some other procedure to check whether the picker is OK?
 

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close