Smart questions
Smart answers
Smart people
Join Tek-Tips Forums
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Member Login




Remember Me
Forgot Password?
Join Us!

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips now!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

Join Tek-Tips
*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.
Jobs from Indeed

Link To This Forum!

Partner Button
Add Stickiness To Your Site By Linking To This Professionally Managed Technical Forum.
Just copy and paste the
code below into your site.

Gallo69 (TechnicalUser) (OP)
26 Oct 09 14:17
I have an Option 81c Rls. 3 Succession, with Call Pilot 5 and CC6 attached. Is there a way to print all the IP addresses associated with the CPP IIs, CallPilot, and CC6 from the PBX CLI?

We are upgrading to a CS1000M MG and I just have a couple of questions... how many IP addresses do I need for the CS1K ELAN, CLAN AND TLAN if needed, and how many do I need for the Sig Server?

Thanks  
cmoegie (TechnicalUser)
26 Oct 09 14:51
Go to LD 117 and PRT HOST PRT ROUTE AND PRT MASK
That should give you the PBX IP'S

GO to LD 48 STAT ELAN which will show you the ELAN IP'S of the Call Pilot and CC6

The 1000M needs 2 IP adresses one for each core.
The Signaling server needs 1 ELAN  and 1TLAN for the physical connections and 1 TLAN for the node IP
We also need 1 ELAN and 1TLAN for VGMC card.

 
Gallo69 (TechnicalUser) (OP)
26 Oct 09 15:10
Thank you so much, so the 2 IP addresses for each core are for E-LAN and C-LAN? What about TLAN?

Also, I noticed the vendor did not include any MC32S cards or VGMC, is this normal practice, not to have any MC32S?
I think they are only needed if IP sets will be deployed correct?
allenmac (TechnicalUser)
26 Oct 09 17:24
The call servers only get E-LAN addresses.

You need 2 because you have 2 cores - 1 Active, 1 Standby.

You need DSPs (VGMC (MC-32), MC-32s, or MGC DSP daughterboard) whenever you need to convert between TDM and one of the VoIP codecs.

If you are not adding any IP Line (VoIP Trunks - SIP, or H.323), or IP sets you don't need any DSPs.
Reusser (Programmer)
26 Oct 09 17:32
We are upgrading to a CS1000M MG and I just have a couple of questions... how many IP addresses do I need for the CS1K ELAN, CLAN AND TLAN if needed, and how many do I need for the Sig Server?

PBX CPUs - 2 ELANs - one each
SigServers - 1 Elan and 2 Tlan (1 is the Node IP-no physical connection)
DSPs - 1 elan and 1 Tlan for each card
Gallo69 (TechnicalUser) (OP)
26 Oct 09 17:33
Make sense, but I noticed that each one of the CPPM PIV card has 2 Ethernet ports, one for the e-lan and the other one for?

Thank you for the help, I am taking a class soon  
Reusser (Programmer)
26 Oct 09 17:48
the other is for the 2 CPUs to talk to each other - if side by side this is probably a cross-over cable.

It is possible for the two CPUs to be located in different locations.
allenmac (TechnicalUser)
27 Oct 09 14:29
Yes.  The 2nd port is for the HSP (High Speed Pipe) and is usually connected via cross connect cable.

In CS1000E switches set up in Campus Redundant mode, the 2 Call Servers are in different geographic locations, and then you need high speed connectivity between the 2 ports (Off the top of my head, I think it requires a guaranteed 300MBps low latency link to keep the Hard Drives and Memory synchronized)

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Back To Forum

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close