INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Member Login




Remember Me
Forgot Password?
Join Us!

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

Join Tek-Tips
*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.
Jobs from Indeed

Link To This Forum!

Partner Button
Add Stickiness To Your Site By Linking To This Professionally Managed Technical Forum.
Just copy and paste the
code below into your site.

VoIP SIP

VoIP SIP

(OP)
Is there an easy way to tell if I have SIP enabled on our PBX?  We are testing VoIP calling with an Iphone App that says it can connect to our PBX.  We have an option 11 that we have upgraded to a CS1000 in order to have 1140E VoIP phones.  We also have Spectralink WVoLAN phones that connect via the Nortel Controller.  The options on the Iphone App called SIP Phone ask for Outbound Proxy, Local Port, RTP Port, SIP Stun (Yes/No), and Codec.  It also has a tab for SIP account information which includes options for Domain, Username/Password.  

Anyone ever hooked up a non Nortel phone such as an LG or Cisco phone to a Nortel PBX using SIP?   

RE: VoIP SIP

you can atleast do SLT in ld 22 and look at the SIP Lics and see if any are considered used/in use

Mato' Was'aka

RE: VoIP SIP

(OP)
REQ  slt
ANALOGUE TELEPHONES      352    LEFT    45    USED   307
CLASS TELEPHONES           0    LEFT     0    USED     0
DIGITAL TELEPHONES       240    LEFT    25    USED   215
DECT USERS                 0    LEFT     0    USED     0
IP USERS                 152    LEFT    33    USED   119
BASIC IP USERS             0    LEFT     0    USED     0
DECT VISITOR USER          0    LEFT     0    USED     0
ACD AGENTS                65    LEFT    41    USED    24

PCA                        0    LEFT     0    USED     0
ITG ISDN TRUNKS            0    LEFT     0    USED     0
H.323 ACCESS PORTS        40    LEFT    24    USED    16
AST                       40    LEFT    31    USED     9
RAN CON                    0    LEFT     0    USED     0
MUS CON                    0    LEFT     0    USED     0

TNS                    32760    LEFT 31696    USED  1064
ACDN                   24000    LEFT 23870    USED   130
AML                       16    LEFT    14    USED     2
IDLE_SET_DISPLAY
LTID                   32760    LEFT 32760    USED     0
RAN RTE                  512    LEFT   512    USED     0
ATTENDANT CONSOLES     32760    LEFT 32755    USED     5
BRI DSL                10000    LEFT 10000    USED     0
DATA PORTS             32760    LEFT 32758    USED     2
PHANTOM PORTS          32760    LEFT 32754    USED     6
SIP ACCESS PORTS           0    LEFT     0    USED     0
TRADITIONAL TRUNKS     32760    LEFT 32509    USED   251
DCH                      255    LEFT   243    USED    12

Looks like I dont have any.  This may sound stupid but is this an actual card I have to put into the switch, or is it just something that has to be enabled?

RE: VoIP SIP

It is a Protocol, like instead of H323. Lot of various SIP PKGs within Rls 5.5, and items relevant to SIP. (Sesion Initiated Protocol) for IP.

Mato' Was'aka

RE: VoIP SIP

• Nortel SIP Lines package (SIPL_NORTEL - 415)
• Third Party SIP Lines package (SIPL_3RDPARTY - 416)
SIP SIP Gateway and Converged Desktop 406 4.0
SIPL_NORTEL Nortel SIP Lines 415 5.5
SIPL_3RDPARTY Third Party SIP Lines 416 5.5

Mato' Was'aka

RE: VoIP SIP

You need to set up the iPhone as a SIP endpointinthe NRS, configure SIP Trunks in the CS 1000 (you already see you need licencs for that) and then do the appropriate dial plan entries.

 

--
Fletch

Nortel Emergency Services PLM
http://nortel.com/e911

Check out this month's E911 Talk podcast at Nortel E911 Talk Podcast

RE: VoIP SIP

Refer to my faq,  its comprehensive guide to configuring 3rd party SIP as endpoint in NRS.  Written specifically for XLite softphone, but the NRS config is the same regardless of what SIP device you are using.

FAQ798-7118: Integrating X-Lite SIP Softphone v4.0 to NRS

MAKE SURE YOU DO STEP 7 of PREREQ's or nothing will work correctly!!!

Funny thing is, the ONLY devices I couldn't get to work are the Nortel 1120/1140 SIP Firmware based phones.

RE: VoIP SIP

(OP)
Our vendor is telling us that CS1000 v4.5 will not work with SIP. They are saying that we would have to upgrade to 5.5 and that Nortel would only support a handful of SIP phones.  Has anyone else been able to use SIP phones on 4.5 with soft-client phones like x-lite.  The iphone has a SIP phone application that we were wanting to try and hook to our PBX.  

Thanks

RE: VoIP SIP

In my faq, I used a 4.5 pbx with a 5.0 nrs

RE: VoIP SIP

(OP)
How can I tell what version NRS I am running?

RE: VoIP SIP

(OP)
I am trying to login to our NRS but it wont accept my level 1 or level 2 password.  Is there a generic p/w that is installed on them?

RE: VoIP SIP

The NRS does not use the same passwords as element manager.  The default passwords are located in the documentation, but there is no guarantee at your site that they have not been changed.

In an enterprise VoIP network, the NRS must be running (at a minimum) the same release as the highest PBX.  If you have a mixed network of 4.5, 5.0, and 5.5 CS1000 systems, then you must be running 5.5 on the NRS.  If your NRS is co-resident on one of your Leader signaling servers, then it is the same software release as the Element Manager.  If you can log into the CLI of the signaling server, the command is swVersionShow.

RE: VoIP SIP

(OP)
Ok I found our password.  We are running NRS 4.5 so I am guessing we will have to upgrade in order to proceed.

 

RE: VoIP SIP

Also if you are running multiple Sig. Servs and decide to set up an alternate NRS, the software will need to be the same on both or you'll have issues with propagation.  

RE: VoIP SIP

No you do NOT have to upgrade.

You will be installing SIP endpoints in the NRS only.  The ONLY thing you program in the PBX is the DN in CDP that points to your SIP trunks.

What your vendor is refering to is in 5.5 the PBX itself actually supports SIP phones and requires licenses, just like any other phone.  In 4.5/5.0 Only way to get SIP phones to work is to program the NRS per my faq.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Resources

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close