46xx IP Phones commands 46xx IP Phones commands szukalabartosz (IS/IT--Management) (OP) 28 Jul 08 08:31 I am trying to find some useful commands, which I can use on my 46xx IP Phone.I know already:Hold, 7 3 7 3 T (RESET) #Hold, 5 6 4 6 3 3 (LOGOFF) #Hold, 8 3 7 8 (TEST) #Hold, 2 3 3 7 (ADDR) #do you guys know any other command?regards, RE: 46xx IP Phones commands 2 mgraval (Programmer) 28 Jul 08 10:53 Invocation Mnemonic Procedure Restrictions<Mute> 2337# ADDR IP ADDRess programming <Mute> 8439# VIEW - VIEW Phone Values & FW file versions <Mute> 767# QOS Quality Of Service Values AKA 802.1p/q <Mute> 7766# SSON Site-Specific Option No. (176=Default) Interfaces enable/Disable for Hub & IrDA <Mute> 73738# RESET RESET phone or to defaults <Mute> 8378# TEST Initiate a self-TEST (# to Quit) <Mute> 564633# LOGOFF LOGOFF an IP from Communications Manager/Definity Only R1.5 and later<Mute> 242# AGC Automatic Gain Control Only 1.7 and later<Mute> 284# CTI Enables/disables the Softphone CTI connection. Only 1.7 and later<Mute> 5264# LANG LANGuage option - 4620 Only! Only 4620 1.72 and later<Mute> 468# INT Allows you to set the speed and duplex. Not recommend. Only 4630SW, 4610SW, 4620SW, 4620 R1.8 and later<Mute> 47687# GROUP allows you to set a GROUP Option that can be testing in the 46xxsetting.txt file. This is useful if you want a particular group of telephones to have a unique settings. Only in 2.0 and later Pressing <Mute/Hold> & <Trnsfr> Together also tests set Tips: <Mute> & <Hold> buttons can both be used interchangeably Some Models only have <Hold> on the screen, so only <Mute> is available when phone is booting, so <Mute> is perfered. RE: 46xx IP Phones commands szukalabartosz (IS/IT--Management) (OP) 28 Jul 08 13:07 great!thank you;) RE: 46xx IP Phones commands intrigrant (Systems Engineer) 29 Jul 08 03:03 <mute>80219# - Set the 802.1X Operational Mode for the LAN port● Pass-thru mode if setting = 0● Pass-thru mode with Logoff if setting = 1● Supplicant mode without Pass-thru or Logoff if setting = 2 RE: 46xx IP Phones commands MiloMindBender (MIS) 1 Aug 08 17:37 MgravalCan you elaborate on the Group setting or provide an example?Thx RE: 46xx IP Phones commands intrigrant (Systems Engineer) 4 Aug 08 16:28 The GROUP option is used for VPN enabled IP Phones, read the docs regarding VPN IP Phones:http://support.avaya.com/japple/css/japple?PAGE=ProductArea&temp.productID=280576&temp.releaseID=317892 RE: 46xx IP Phones commands phoneguy55 (Programmer) 5 Aug 08 08:34 You could use the group option for many things. VPN phone being one of them. Let's say you want some phones to have some settings in your 46xxsettings.txt file but others not to have it. You would use the group settings for this. The thing that I don't like is that you manually need to set the phone to a group. By default everyone is in group 0.