Samp : can't access samp interface

hello,

I m installing an S8500B.
During the wizard installation, the system has failed to detect the RMB.

I tried to connect by a telnet session, but it didn t seems to work or to be active.

Any clue about how to access the SAMP?

this is what i tried.
...........................................................

dadmin@xx-xxxxx-server1> sampcmd
/usr/bin/sudo: no passwd entry for samp!

dadmin@xx-xxxxxx-server1> sampdiag -v
The SAMP is using the OLD IP address.
Could not determine what port the SAMP is using for SSH.

ERROR :: SAMP FAILED ::

dadmin@xx-xxxxxx-server1> ping my-samp
PING my-samp (10.221.248.1) from 10.221.248.2 : 56(84) bytes of data.
64 bytes from my-samp (10.221.248.1): icmp_seq=1 ttl=64 time=0.210 ms
64 bytes from my-samp (10.221.248.1): icmp_seq=2 ttl=64 time=0.200 ms
64 bytes from my-samp (10.221.248.1): icmp_seq=3 ttl=64 time=0.188 ms
64 bytes from my-samp (10.221.248.1): icmp_seq=4 ttl=64 time=0.201 ms
64 bytes from my-samp (10.221.248.1): icmp_seq=5 ttl=64 time=0.208 ms
64 bytes from my-samp (10.221.248.1): icmp_seq=6 ttl=64 time=0.213 ms
64 bytes from my-samp (10.221.248.1): icmp_seq=7 ttl=64 time=0.203 ms
64 bytes from my-samp (10.221.248.1): icmp_seq=8 ttl=64 time=0.185 ms
64 bytes from my-samp (10.221.248.1): icmp_seq=9 ttl=64 time=0.199 ms
64 bytes from my-samp (10.221.248.1): icmp_seq=10 ttl=64 time=0.200 ms
64 bytes from my-samp (10.221.248.1): icmp_seq=11 ttl=64 time=0.208 ms

--- my-samp ping statistics ---
11 packets transmitted, 11 received, 0% loss, time 10012ms
rtt min/avg/max/mdev = 0.185/0.201/0.213/0.014 ms
........................................................


Thanks for ur help.