I don't know how deep y'all get in this forum, but I have an Augat DSX3 Panel that I won off of Ebay. It has 22 cards in it but I am not sure it works. I didn't get any documentation of how to wire it up. The only connections I see on the back of the dsx as far as power is +48V and -48V. When I got the panel, there were 3 wires already connected, but they are cut off. I am assuming that those go to +48V and -48V. There are also 2 small holes for each card that looks like headphone jacks. It isn't the BNC connector or coax connector. I am not sure what that is and how it is supposed to be wired. Can someone clue me in on how this panel is actually wired? I tried to find some documentation on the internet but couldn't find any.
Red Flag Submitted
Thank you for helping keep Tek-Tips Forums free from inappropriate posts. The Tek-Tips staff will check this out and take appropriate action.
Reply To This Thread
Posting in the Tek-Tips forums is a member-only feature.